I need to install a rod to hang up clothes in a closet.? - install clothes rod in wardrobe
The staff was in the closet came with the weight of the clothes. I learned that no nails fix the rod in the closet walls. Basically, it's fine woodwork, the "walls" of the company. I thought, by securing a 2 x 4 on the sides, then the holder of the bar. All ideas are welcome. :-)
Monday, February 1, 2010
Install Clothes Rod In Wardrobe I Need To Install A Rod To Hang Up Clothes In A Closet.?
7 comments:
Fatties, you can use you bring the rod to the walls of the closet. Tha should receive sufficient support for both ordinary and clothing.
You could do that, but these things rock bolt. opened as soon as you get through dry wall.
It needs the support of the amounts of heavy elements such as a bar of clothing. Try two of four (with a hole drilled through the pole position) attached to the side rails.
If weight is a problem with the idea, which is 2 x 4 wall, which I did. I also 1 x 4, sometimes depending on the distance between the walls. If the walls are real low, it might even 2 x 6 (I'm not). For the pole, I have galvanized pipe and screw caps. You will find in the field of sanitation. As a rule, comes in black or metallic. You can (any color you want or do not paint). Once completed, the resulting cluster can be used as a pull-up bar, if you want. If you miss a window or a door, including couplers 90 degrees. The tube is threaded into pre-cut sizes available. You can compensate for different lengths to stop a change in the thickness of the wood. You can also use a hole in the timber is large enough to vote for the pole and to record the purchase of the flange. I create a combination of these elements, the furniture lasts a lifetime. The galvanized steel pipe is relatively inexpensive for the force. I almost had the idea of a television program he is about 15 years and haveExperimenting with it since.
Closet Maid has bars and floor beams bracket which work very well. The same thing happened to me in my laundry room, where I have a shelf and rod for hanging things. He fell, and everything collapsed. My husband has a new one with the support and it is now very strong. They were brought in Lowe's.
I'm not sure what kind of strain can, but you can try new is as follows (see link below to install), and more support.
http://www.lowes.com/lowes/lkn?action=pr ...
Another good thing to be done, the media have once again in this way (see link below)
http://www.lowes.com/lowes/lkn?action=pr ...
You can get this order at any hardware store. Depending on the length of the rod, you want to use more rear brackets to help better distribute the load.
I think you have the correct answer, but why update support for the 2 x 4? Therefore, it is linked as much as the owners. I had the same problem. I have a hardwood (oak) to (any possibility of splitting the wood my heavy clothing) to prevent. Then I cut a half circle with my drill. Instead of a wooden rod, I used a metal bar (no bending or breaking). Located in a semicircle, and is very safe.
Post a Comment